top of page
Multi-Mode Smart Servo

Multi-Mode Smart Servo

The Multi-Mode Smart Servo features all-steel gears and high torque. It can switch modes using the Smart Robot Servo Programmer (sold separately). In standard mode, the operation angle is ±150 degrees, while in continuous mode, the speed is controlled based on the PWM signal.
 
To switch modes using the Smart Robot Servo Programmer:
      
  1. Connect the servo to the programmer
    2.   
  2. Set the sliding switch at the top left of the programmer to "S" (standard mode) or "C" (continuous mode)
    3.   
  3. Connect the battery or battery pack
    4.   
  4. Press and hold the "P" button for 5 seconds (all LEDs will flash when you're ready to release the button)

  • Specifications

    Multi-Mode Smart Servo:

    1. Dimensions (L x W x H): 40 x 20.1 x 38.3 mm
    2. Weight: 65 g
    3. Horn gear spline: 25 T (5.9 mm)
    4. Running degree: 300° (standard mode), 360° (continuous mode)
    5. Operating voltage: 6-7.4 V
    6. Speed (no load): 62 RPM (6 V)
    7. Stall torque: 20 kg-cm (6 V)

     

    Smart Robot Servo Programmer:

    1. Requires a 6 V battery with a TJC8 connector or the 6 V DC Battery Holder
    2. Programming setting modes: standard, continuous

     

    Servo Horn 25 T:

    1. Material: aluminium alloy
    2. Inner spline: 25 T (5.9 mm)

  • Returns & Exchanges

    1. According to the Consumer Protection Act, ReMiSYS Technology Co., Ltd. provides you with a seven-day cooling-off period upon receipt of the goods. Please note that this period is not a trial period. You have the right to return or exchange the product, and there is no need to bear additional costs for the return or exchange shipping fees.
       
    2. Minor issues such as slight detachment of cables, minimal stains on the device, a 2-3 cm deviation in device size, or slight color differences fall within the acceptable range according to international inspection standards and are not considered defects.
       
    3. To protect consumer rights, once the purchased product is activated or powered on, components such as batteries, motors, sensors, and related accessories cannot be fully restored to their original condition. Except for new product malfunctions, once the product is unsealed and used, a buyer-seller relationship is established, and returns must be handled according to the relevant provisions of the Civil Code regarding defects in goods, rather than being unconditionally accepted.
NT$1,500 Regular Price
NT$1,350Sale Price
bottom of page